Vnish is a custom firmware for ASIC miners. All firmware has been tested for a long time before being uploaded for download and compared to the stock BITMAIN firmware.
Mineitor and Vnish are working together to help customers to manage several miners in batch mode. You can see all brands in one place, grouped together, and apply various settings and configurations in a more secure way.
If you see the message: can not find signature when you flash the ASIC with VNISH firmware you need to take off bitmain software protection. This message means that your ASIC has BITMAIN firmware 2019 year that has overwritten protection.
If you have BITMAIN firmware 2019 you can try to remove the protection using the signature_l3plus file or the SD card image (all files you can download from this page)
If during the flashing process via the SD card you cant install the vnish firmware (2 leds is not blinking) check SD manual one more time or change SD card , if not help then most likely your control board is infected with a strong virus, you need to use a special recovery manual ( SD card restore )
ATTENTION: Firmware is working with Antminer L3+/L3++
If you see the message: can not find the signature when you flash the ASIC with VNISH firmware you need to take off bitmain software protection. This message means that your ASIC has BITMAIN firmware 2019 year that has overwrite protection.
If you have BITMAIN firmware June 2019 or earlier you can remove the protection using the "signature" file and then flash vnish firmware. If you have firmware 31 July 2019 you can remove the protection using the "signature_31july" file, also installing our firmware is possible via the SD card (all files you can download from this page) You can check the firmware version in the System - file system version
If during the flashing process via the SD card you see that 2 lamps (green and red) on the control board are on and don't blink, then most likely your control board is infected with the ANTBUILD virus, you need to use a special ANTBUILD_RECOVERY image to block the virus (Attention, this image can only be used on infected Asics with the antbuild virus)
ATTENTION: Firmware is working only with Antminers S9, S9i, S9j
If you see the message: can not find signature when you flash the ASIC with VNISH firmware you need to take off bitmain software protection. This message means that your ASIC has BITMAIN firmware 2019 year that has overwrite protection
ATTENTION: Firmware is working only with T9+
If you have BITMAIN firmware June 2019 or earlier you can remove the protection using the "signature" file and then flash vnish firmware. if you have firmware from July 2019 or later, then installing our firmware is only possible via the SD card (all files you can download from this page) You can check the firmware version in the System - file system version.
Unlock SSH is working will all types of the Bitmain firmware except December 2019
If you have Bitmain firmware December 2019 or above you must use SD CARD (you can find it on our web page). You can check the firmware version in the System - file system version
Download now for S17+
Unlock SSH